Skip to content
ISO 9001:2015 certified wire manufacturer · IMT FaridabadCHQ · Spheroidized annealed · Phosphated & drawn · Hard bright · Nail wireFinished sizes 2.80 mm to 30 mm · Boron, alloy and MS grades2,500 MT per month drawing · 700 MT per month annealing · SCADA-controlled furnacesMaterial test certificate with every lot · Lot & coil traceabilityEnquiries: +91 99905 67777 · mail@indisteel.inISO 9001:2015 certified wire manufacturer · IMT FaridabadCHQ · Spheroidized annealed · Phosphated & drawn · Hard bright · Nail wireFinished sizes 2.80 mm to 30 mm · Boron, alloy and MS grades2,500 MT per month drawing · 700 MT per month annealing · SCADA-controlled furnacesMaterial test certificate with every lot · Lot & coil traceabilityEnquiries: +91 99905 67777 · mail@indisteel.in
Indisteel logoINDISTEELPrivate Limited Get a quote
  1. Home
  2. Infrastructure & facilities
Infrastructure

Infrastructure and Facilities

A 2022-built wire processing plant at IMT Faridabad with pickling, phosphating, PRECONS bell-type annealing furnaces, ASSOMAC IVD drawing machines and a full inspection laboratory — 2,500 MT per month drawing and 700 MT per month annealing capacity.

Bell-type annealing furnaces
IVD drawing floor
Coil strapping and packing
4,500sq m plant area, IMT Faridabad · est. 2022
2,500 MTper month wire drawing capacity
700 MTper month annealing capacity
38–40people — production, QC, stores, dispatch
Key equipment

Drawing and Annealing

The two operations that decide wire quality — size on the drawing line, structure in the furnace — run on equipment from ASSOMAC and PRECONS.

ASSOMAC inverted vertical drawing machine
Wire drawing · ASSOMAC Machines, Ghaziabad

Inverted Vertical Drawing (IVD) Lines

ASSOMAC inverted vertical drawing machines draw coil-to-coil with the finished wire wound directly onto carriers — 2,500 MT per month of drawing capacity across finished sizes from 2.80 mm to 30 mm. The IVD design keeps a large coil under control at high speed, which is what holds diameter and ovality steady along a 1-tonne coil.

MachinesASSOMAC inverted vertical drawing (IVD)
Finished size2.80 – 30.00 mm
Size controlMicrometer checks at start-up and during the run
Drawing capacity2,500 MT per month
PRECONS bell-type annealing furnaces
Annealing · PRECONS (Precision Controls), Chennai

Bell-Type Annealing Furnaces

All furnaces are SCADA-implemented — cycles programmed by grade, monitored live and logged per charge. PRECONS bell furnaces anneal wire rod and drawn coils under a nitrogen atmosphere after a vacuum purge. The sealed inner cover and 360° radiant heating give uniform temperature through the whole coil stack, which is what produces an even spheroidized structure with decarburization kept in check.

FurnacesPRECONS bell-type
ControlSCADA — programmed, monitored, logged
AtmosphereNitrogen with vacuum purge
Annealing capacity700 MT per month
Annealing facility

Bell-Type Annealing Furnaces

PRECONS bell-type furnaces give Indisteel 700 MT per month of controlled-atmosphere annealing, with the flexibility to run alloy, boron and MS grades side by side.

Annealing

Bell-Type Annealing Furnaces

PRECONS bell furnaces with nitrogen atmosphere and vacuum purge. SCADA-implemented: every cycle is programmed, monitored and logged from the control room.

Annealing

Controlled-Atmosphere Cycles

Heating, soaking and cooling profiles set by grade for alloy, boron and MS steels — precise, repeatable cycles with a record for every charge.

Annealing quality

What Our Annealing Delivers

Seven results we check on every charge — the reasons customers buy annealed wire from Indisteel rather than annealing rod themselves.

≥ 80% Spheroidization

Controlled sub-critical cycles in sealed bell furnaces produce a spheroidized structure of 80% and above, verified under the microscope on every charge.

Uniform Grain Size

360° radiant heating and long soak periods equalise temperature through the whole coil stack, so grain size and hardness are uniform from the outer wrap to the core.

Zero or Negligible Decarburization

Nitrogen atmosphere after a vacuum purge keeps oxygen out of the retort — decarburization on the annealed coil is held at or near the level of the input wire rod.

Bright Surface Finish

Coils come out of the furnace clean and bright, without scale or oxide film, ready for pickling and phosphating or for direct dispatch as annealed coil.

Shorter Cycle Time

Bell furnaces working in rotation keep charges moving, so annealed material is available without waiting for a single furnace to free up.

SCADA-Controlled Cycles

All furnaces run on SCADA: heating, soaking and cooling profiles are programmed by grade, monitored live and logged for every charge — so the same cycle is repeated exactly, lot after lot, with a record for audit.

Shorter Lead Time, Consistent Quality

Annealing capacity of 700 MT per month against 2,500 MT of drawing capacity, coil-wise inspection and grade-wise hardness windows mean customers get the same annealed wire, on time, every lot.

Machinery list

Plant and Machinery

Complete surface preparation, annealing, drawing and packing in-house. We do not manufacture bars and do not carry out straightening or cut-to-length operations.

SectionEquipment
Wire drawingASSOMAC inverted vertical drawing (IVD) machines — finished sizes 2.80 to 30.00 mm
AnnealingPRECONS bell-type annealing furnaces — SCADA-controlled, nitrogen atmosphere with vacuum purge
SurfacePickling line with rinsing and neutralising tanks
SurfaceZinc phosphating line
FinishingCoil cutting and packing facility
HandlingEOT cranes and material handling equipment
Raw material

Rod from Integrated Mills

CHQ and drawing-quality wire rod from JSW, Tata Steel, JSPL, Bhushan Steel and RINL (Vizag Steel), received with mill test certificates and re-verified on our spectrometer. Rod heat numbers stay attached to every coil we produce.

Process flow

See the Route Map

Four product routes — HB, PPD, SAP and SAP + PPD — through pickling, phosphating, annealing, drawing, inspection and packing.

Planning a New Part or a Supplier Change?

Send the grade, size and monthly quantity — we will confirm process route, lead time and packing.

Request a quotationWhatsApp +91 99905 67777
WhatsApp