CHQ · Annealed · Phosphated & drawn wire · IMT Faridabad

Steel Wire forFastener ManufacturingAutomotive ComponentsMachining & Engineering PartsSprings, Nails & Industry

CHQ, spheroidized annealed and phosphated drawn wire in boron and alloy grades for bolts, screws, nuts and rivets — property class 4.8 to 12.9.

Explore products Company profile (PDF)

Hero — finished coils in the dispatch bay

ISO 9001:2015certified · est. 2022

2.80–30mm finished wire size range

2,500MT per month wire drawing capacity

700MT per month annealing capacity

4,500sq m plant area, IMT Faridabad

MTCmaterial test certificate with every lot

ISO 9001certified quality management system

About Indisteel

Process Capability You Can Measure. Quality You Can Trace.

Established in 2022 at IMT Faridabad, Indisteel is a complete wire processing plant — pickling, phosphating, bell-furnace annealing, inverted vertical drawing, an in-house laboratory and a lot-and-coil traceability system, all under one roof. We serve fastener, automotive component, cold forging, spring and engineering manufacturers across northern India.

2,500 MT per month wire drawing and 700 MT per month annealing capacity on a 4,500 sq m site
PRECONS bell-type annealing furnaces and ASSOMAC IVD drawing machines
Rod from JSW, Tata Steel, JSPL, Bhushan Steel and RINL
Material test certificate with every lot

About the company Infrastructure

Capability at a glance

2,500 MTper month wire drawing

700 MTper month annealing

2.80–30mm finished size

4,500sq m plant area

Nitrogen + vacuum bell-furnace annealing
ASSOMAC inverted vertical drawing (IVD) machines
Pickling, zinc phosphating, packing in-house
ISO 9001:2015 certified · SCADA-controlled furnaces

Products

Wire for Every Stage of Cold Forming

From soft annealed coils for heavy forging to bright drawn wire for nails — every product leaves the same plant, the same laboratory and the same traceability system.

CHQ Wire

Cold heading quality wire in MS, boron and alloy steel grades, supplied annealed or drawn to the surface and size your headers need.

Hex bolts & studsMachine & self-tapping screwsHex nuts & flange nuts

View specification

Spheroidized Annealed Wire

Wire annealed in nitrogen-atmosphere bell furnaces to a spheroidized structure — soft, uniform and ready for heavy cold forming.

Hex nuts & flange nutsChain & sprocket partsShafts & machined partsCold-forged components

View specification

Phosphated & Drawn Wire

Pickled, zinc-phosphated and drawn to size on IVD lines — a lubricated, dimensionally tight wire that runs cleanly on headers.

Machine & self-tapping screwsRivets & pins

View specification

SAP + PPD Wire

The full fastener-grade route — spheroidize annealed, phosphated and drawn — for wire that goes straight from coil to header.

Hex bolts & studsSocket-head cap screwsTie rods & ball studsWheel bolts & engine fastenersCold-forged components

View specification

Hard Bright (HB) Wire

Pickled, phosphated and hard drawn wire — supplied in the as-drawn condition, without annealing, for nails, wire forms and general engineering.

Rivets & pinsChain & sprocket partsSprings & wire formsShafts & machined parts

View specification

Nail Wire

Low-carbon bright wire drawn to close tolerance for wire-nail machines — consistent size, clean surface and uniform tensile from coil to coil.

Wire nails

View specification

All products and grades

Markets & applications

What Our Wire Becomes

From a class 12.9 wheel bolt to a roofing nail — the parts our customers make from Indisteel wire, and the grade and condition each one needs.

Hex bolts & studsSocket-head cap screwsMachine & self-tapping screwsHex nuts & flange nutsRivets & pinsTie rods & ball studsChain & sprocket partsWheel bolts & engine fastenersSprings & wire formsWire nailsShafts & machined partsCold-forged components

Markets and applications in detail

Process flow

Four Routes, One Traceable Line

Each product follows its own route through the plant. The map shows which stations every route passes — and the same lot number follows the coil through all of them.

HBHard Bright Wire

Pickled, phosphated and hard drawn to size without annealing — for nails, wire forms, rivets and general engineering.

PPDPhosphated & Drawn Wire

Pickled, phosphated and drawn — the standard route for MS and low-alloy fastener wire.

SAPSpheroidized Annealed Wire

Rod pickled and spheroidize annealed, supplied as soft annealed coil.

SAP + PPDAnnealed, Phosphated & Drawn

Annealed, then pickled, phosphated and drawn to finished size — the full fastener-grade route.

Full process flow

Why Indisteel

What You Get in Every Coil

Seven things we hold ourselves to on every order — the reasons fastener and forging plants switch to us and stay.

Excellent Quality Material

CHQ and drawing-quality rod from JSW, Tata Steel, JSPL, Bhushan Steel and RINL, verified on our own spectrometer before it enters production — never a mixed or unknown heat.

Advanced Manufacturing Facility

SCADA-implemented PRECONS bell furnaces under nitrogen atmosphere, ASSOMAC inverted vertical drawing lines, complete pickling and phosphating, and an in-house laboratory — all installed together in 2022 on one 4,500 sq m site.

Consistent Quality and Process Control

Grade-wise hardness windows, controlled annealing cycles and coil-wise inspection under an ISO 9001:2015 system, so the wire behaves the same on your machine lot after lot.

Traceability with Every Lot

One heat number, one lot number, one furnace charge number — printed on every coil tag with a QR code, and a material test certificate from our own measurements with every dispatch.

Fine and Secure Packing

Coil weights set to your payoff, compacted and strapped with steel wire at multiple points, wrapped on request and tagged with grade, size, condition and weight — ready for crane or forklift.

Reliable and Timely Delivery

Located at IMT Faridabad in the heart of the northern fastener belt, with 2,500 MT per month drawing capacity, 700 MT per month annealing capacity and short annealing cycles — committed dates, and a phone call if anything changes.

Customer-Focused Approach

Direct access to the people who run the furnaces and drawing lines; grade recommendations for your part; plant visits and audits welcome by appointment.

Plant & machinery

Equipment Chosen for Consistency

Drawing lines from ASSOMAC and bell furnaces from PRECONS — two of India's most established names in wire drawing and annealing equipment.

ASSOMAC inverted vertical drawing machine

Wire drawing · ASSOMAC Machines, Ghaziabad

Inverted Vertical Drawing (IVD) Lines

ASSOMAC inverted vertical drawing machines draw coil-to-coil with the finished wire wound directly onto carriers — 2,500 MT per month of drawing capacity across finished sizes from 2.80 mm to 30 mm. The IVD design keeps a large coil under control at high speed, which is what holds diameter and ovality steady along a 1-tonne coil.

Machines	ASSOMAC inverted vertical drawing (IVD)
Finished size	2.80 – 30.00 mm
Size control	Micrometer checks at start-up and during the run
Drawing capacity	2,500 MT per month

Annealing · PRECONS (Precision Controls), Chennai

Bell-Type Annealing Furnaces

All furnaces are SCADA-implemented — cycles programmed by grade, monitored live and logged per charge. PRECONS bell furnaces anneal wire rod and drawn coils under a nitrogen atmosphere after a vacuum purge. The sealed inner cover and 360° radiant heating give uniform temperature through the whole coil stack, which is what produces an even spheroidized structure with decarburization kept in check.

Furnaces	PRECONS bell-type
Control	SCADA — programmed, monitored, logged
Atmosphere	Nitrogen with vacuum purge
Annealing capacity	700 MT per month

Every lot, every coil

Incoming rod verificationEvery heat of rod is checked on our spectrometer against the mill certificate before it enters production — chemistry, hardness and microstructure are recorded against a new lot number.

Spheroidization and decarburization controlAnnealed coils are examined under the microscope for spheroidization percentage and decarburization depth. Results are recorded coil-wise; a coil that misses the grade window is held, not shipped.

Hardness window per gradeGrade-wise annealed and as-drawn hardness ranges are defined in our masters and agreed with the customer. Every coil is tested on a Rockwell tester and judged against that window automatically.

Dimensional controlDiameter and ovality checked with calibrated micrometers at start-up and during the run on every drawing machine, and again at final inspection.

Surface and coatingPhosphate coating weight measured in the laboratory; wire surface inspected for scratches, scale and lubricant carry-over before packing.

Quality

Tested In-House. Certified per Lot.

Our laboratory runs an optical emission spectrometer, Rockwell hardness tester (HRB / HRC), universal testing machine, metallurgical microscope, phosphate coating-weight test, and dump and wrap tests. Every lot ships with a material test certificate traceable to the rod heat number.

ISO 9001:2015 certified quality management system
Coil-wise annealing inspection — hardness, spheroidization %, decarburization
Lot, coil and furnace charge numbers on printed tags
SCADA-controlled annealing — every cycle programmed, monitored and logged

Quality and testing

From the Managing Director

"Trust is earned lot by lot — so every coil we ship carries a number you can trace back to the rod heat."
When we set up Indisteel in 2022, we had one clear idea: a fastener or forging plant should be able to buy wire the way it buys any other precision input — to a specification, with a certificate, from people who understand what happens to that wire on a header.
Our family has spent decades in the steel trade, supplying wire rod and long products to manufacturers across northern India. We saw where the gaps were: hardness that varied from coil to coil, decarburization nobody had measured, and test certificates that were copies of the mill's rather than the processor's own. Indisteel was built to close those gaps — with bell furnaces under a controlled atmosphere, inverted vertical drawing machines, an in-house laboratory, and a traceability system that gives every coil a number.

Sumeet GargManaging Director, Indisteel Private Limited
Read the full message

Industries

Who We Draw For

Fastener makers are our largest customers, followed by automotive component, cold forging, spring and engineering manufacturers across northern India.

Fasteners

Bolts, screws, nuts, studs and rivets in property classes 4.8 to 12.9 — our largest market. Boron and alloy grade SAP + PPD wire for high-speed headers, MS wire for standard fasteners.

Automotive

Cold-forged and cold-headed parts for two-wheeler, passenger car and commercial vehicle supply chains, with the lot-wise traceability and test certificates that Tier-1 quality systems require.

Cold forging

Cold Forging

Spheroidized annealed wire in medium carbon and alloy grades for multi-station forging of shafts, pins, sleeves, gear blanks and hubs.

Machining & engineering

Machining & Engineering

Bright drawn and annealed wire for turned parts, shafts, dowels, hardware and general engineering components.

Springs & wire forms

Springs & Wire Forms

Medium and high carbon wire in the hard-drawn or annealed condition for spring and wire-form manufacturers.

Nails & hardware

Nails & Hardware

Bright low-carbon nail wire drawn for nail machines, plus wire for staples, hooks, fencing and hardware.

Trusted by

Rohtas Fasteners

Caparo

Sterling Tools

Pooja Forge

Victora Industries

Micron Precision Screws

PDF

Company profile brochureProducts, grades, process routes, plant and machinery, quality system and contacts — in one document for your vendor file.

Download

Send Us Your Specification. We Will Confirm Grade, Size and Delivery.

Share a drawing, a test certificate or just the part you make — our team replies with a grade recommendation and a quotation.

Request a quotation WhatsApp +91 99905 67777